| Parameters |
| System Rating |
1kVA |
| Operating DC Voltage |
12V |
| Switching Element |
Mosfet |
| Charger Topology |
Boost Mosfet |
| Grid Setable Range |
| Nominal Grid Voltage |
230V |
| Battery Low Buzzer |
10.8V |
Battery Low Cut – 0.3V |
| Battery Low Cut |
10.5V |
10-11.5V |
| Battery High Cut |
16.5 |
16.5-17.5V |
| SPV Charging Current |
18A |
11-40A |
| SPV Charging Voltage Boost |
SMF |
13.7V |
13.5-14.5V |
| TUB |
15V |
14-15.5V |
| SPV Charging Voltage Floot |
SMF |
13.7V |
13.5-14.5V |
| TUB |
14.2V |
13.8-14.5V |
| Grid-Battery Charging Voltage Boost |
SMF |
13.5V |
13.5-14.2V |
| TUB |
14.5V |
13.5-15V |
| Grid-Battery Charging Voltage Float |
SMF |
13.5V |
13.5-14.2V |
| TUB |
13.8V |
13-14.2V |
| Grid-Battery Charging Current |
10A/15A |
3A-15A |
| Grid Reconnect @ Battery Voltage |
11.8V |
11-12V |
| Grid Low Cut Voltage |
IT Mode Enable |
170V±10V |
| IT Mode Disable |
100V±10V |
| Grid Low Cut Recovery |
IT Mode Enable |
180V±10V |
| IT Mode Disable |
110V±10V |
| Grid High Cut Voltage |
IT Mode Enable |
265V±10V |
| IT Mode Disable |
290V±10V |
| Grid High Cut Recovery |
IT Mode Enable |
255V±10V |
| IT Mode Disable |
280V±10V |
| Change Over (Battery to Mains) |
IT Mode Enable/Disable |
<5ms |
| Change Over (Mains to Battery) |
IT Mode Enable |
<10ms |
| IT Mode Disable |
<60ms |
| Operating Mode |
Smart/PCU/Hybrid, Default – SMT |
| Inverter |
| Output Phase |
1 Phase,3 Wire |
| Nominal Output Voltage |
220 ±8% |
| Nominal Frequency |
50 ±1% |
| Load Power Factor |
0.8 |
| Output Waveform |
Sinewave |
| Typical Efficiency |
>80% |
| Voltage Harmonic |
<3% (Liner Load) |
| *Overload Capacity (IT Load Enable)% |
100-110:10 Min 150-200:2 sec
110-120:2 Min 200-300:1Sec
120-150 :30sec >350:20ms |
| * Overload Capacity (IT Load Disable)% |
100-120 (3time auto reset):60 sec 250-350:1 sec 120-150 (3time auto reset) : 30 sec >350:20ms 150-200 : 2sec |
| Protection |
Overload, Battery Low, Battery High, Output Short Ckt, Battery Reverse, Phase reverse, Over Heat, Over frequency, Under frequency, SPV High |
| LED Indication |
System ON, (IT mode, SMF/TUB, Boost Chd, DG mode, Grid Chg.) Enable/Disable |
| Switches |
Reset for System ON/OFF, UP, Down, Back, Enter (For LCD Calibration) |
| Display |
Battery Voltage, Charging Current, Grid Voltage, Grid Frequency, Output Voltage, Output Frequency, Load %, Battery Graph, Overheat, SPV Current, Working Mode(HYB/PCU/SMT) |
| Solar |
| Switching Element |
Mosfet |
| Controller |
Yes |
| Type of Charger |
MPPT with PWM |
| Efficiency |
>94% |
| Input Voltage Range (Min – Max) Voc |
15-45V |
| Maximum PV Power Recommended |
1000W |
| Environment |
| Operating Temperature |
0-50°C |
| Cooling |
Fan |
| Max. Relative Humidity @ 25*C (Non Condensing) |
95% |
| Noise @ 1meter |
50dB |
| Standard Compliance |
|
| Dimension (LXWXH)mm |
305.5 x 327.8 x 116 |
